A dimmer does more than adjust brightness. Turned down to 20 or 30 percent in the evening, a warm-white LED at 2200K creates the kind of light that signals wind-down and rest, without the disruption of a bright overhead fitting. Dimming is what makes a lighting scheme feel designed rather than switched. It is also one of the simplest upgrades available: a plug-in dimmer requires no electrician, no tools, and no commitment.
For hardwired wall installations, trailing-edge dimmers are the correct specification for most LED loads. They cut the end of the AC sine wave rather than the start, producing a softer switch-on that is far more compatible with LED drivers than older leading-edge technology. The result is smooth, quiet dimming from full brightness to the lowest comfortable level, without buzz, flicker, or dropout.
The plug-in range covers installations where hardwiring is not practical. The inline, hand, and foot dimmers attach to the lamp cord and adjust brightness without returning to the wall. The Rotary Plug-In is the indoor socket option. The DimEzy Smart Plug-In is the outdoor option: IP55 rated for patios, gardens, and alfresco spaces, with app and voice control for scheduling and scene management.
The low-voltage range covers 12V and 24V DC systems. Standard 240V dimmers cannot be used on low-voltage circuits. Dulora stocks 12-24V DC PWM switches in standard and wireless configurations, and a 1-10V switch for commercial LED systems.
Free metro delivery on orders over $99, free regional delivery over $199.
Atmosphere, Illuminated.
Buying Guide
Which dimmer is right for my LED lights?
The right dimmer depends on your installation type and whether your circuit is 240V mains or low-voltage. For hardwired 240V wall switches, trailing-edge LED dimmers are the recommended type for most LED loads and deliver smooth, flicker-free dimming. The Universal Push Button is an exception: it supports both leading-edge and trailing-edge loads, making it a practical choice where compatibility across mixed load types is needed. For plug-in lamps and fittings without a ceiling rose, the plug-in, inline, hand, or foot dimmer options require no hardwiring. The DimEzy Smart Plug-In is the outdoor plug-in option for gardens and patios. For 12V or 24V DC low-voltage systems, a dedicated PWM dimming switch is required; standard 240V dimmers cannot be used on low-voltage circuits.
Do I need an electrician to install a dimmer?
It depends on the type. Plug-in dimmers, including the inline, hand, foot, and rotary plug-in models, connect between the wall socket and your lamp without any wiring work. No electrician is required. The DimEzy Smart Plug-In is the outdoor plug-in option: it connects to an outdoor power point and is IP55 rated for gardens, patios, and alfresco spaces. Wall switch dimmers, including all DimEzy wall plate models and the 1-10V control switch, replace an existing wall switch and require installation by a licensed electrician under AS/NZS 3000. The 12-24V DC PWM switches connect into a low-voltage circuit and should also be installed by a licensed electrician.
Will these dimmers work with my LED globes?
Most 240V mains dimmers in this collection are trailing-edge, which is compatible with most quality dimmable LED globes. The Universal Push Button supports both leading-edge and trailing-edge loads. Before purchasing, confirm that your globe is specifically listed as dimmable: not all LED globes support dimming, and a non-dimmable globe will not dim smoothly on any dimmer switch. For the best result, match the dimmer's minimum and maximum LED load rating to the total wattage of the globes on the circuit. If the total load falls below the dimmer's minimum threshold, you may see flickering or unstable behaviour at low brightness levels.
Can I use a dimmer on a low-voltage circuit?
No. Standard 240V wall dimmers cannot be used on 12V or 24V DC low-voltage circuits. The voltage mismatch will damage the LED driver or transformer and is a safety risk. Dulora stocks 12-24V DC PWM dimming switches specifically for low-voltage installations, available as a standard switch or with a wireless remote for installations where wall access is limited. The 1-10V dimming switch is designed for commercial and architectural LED drivers that accept 1-10V control signals, which is a separate protocol from PWM dimming.
Frequently Asked Questions
Dimmers
- What is a trailing-edge dimmer?
- A trailing-edge dimmer cuts the end of the AC power cycle rather than the start, producing a softer electrical switch-on that is more compatible with LED drivers. Trailing-edge dimmers give smooth, quiet dimming with LED loads and are less likely to cause buzz or flicker than older leading-edge models. Most 240V mains dimmers in this collection are trailing-edge; the Universal Push Button supports both leading-edge and trailing-edge loads.
- Can I dim LED lights without an electrician?
- Yes. Plug-in dimmers, including the inline, hand, foot, and rotary plug-in models, connect between the wall socket and your lamp with no hardwiring required and are suitable for rental properties. The DimEzy Smart Plug-In connects to an outdoor power point and is rated IP55 for outdoor use.
- What causes LED lights to flicker on a dimmer?
- Flickering is usually caused by a mismatch between the dimmer type and the LED driver, a circuit load below the dimmer's minimum rated threshold, or a non-dimmable globe. Switching to a trailing-edge dimmer and confirming the total load exceeds the minimum rating resolves most flickering issues.
- Do smart dimmers require a hub?
- The DimEzy Smart Plug-In Dimmer connects to a home Wi-Fi network directly without a separate hub or bridge. It is compatible with app control, Google Assistant, and Amazon Alexa. Check the product page for the specific app requirements and router compatibility.
